Creative Express February 2004
CEX109 St. Pat's Hat
Stamps by: Hat by Museum of Modern Rubber; Shamrocks by VIP; Saying by Azadi.
Supplies needed:
Double stick tape or glue
Dries clear adhesive
Pop Dots: 1/8 and 1/16 inch
Measurements:
Main Card: 8 1/2 x 11
Folds to: 5 1/2 x 8 1/2
Green Panel: 5 1/4 x 8 1/4
White Panel: 4 3/4 x 7 3/4
Gingham: 4 5/8 x 7 5/8
Instructions:
1. Place all images onto the support cardstock and
detail trim.
2. Using the dries clear adhesive, glue on the flowers. These
need to be held until dry.
3. Layer the background panels onto the main card.
4. Complete the inside of the card.
5. Using the 1/8 inch pop dots, position the hat onto the main card.
6. Using the 1/16 inch pop dots, position the shamrocks coming out
of the hat.
7. Using the dries clear adhesive, glue on the shamrock shape and
the rhinestones. Allow to dry.
CEX110 Bunny Leprechaun Card
Stamps by: Bunny by Stamps Happen; Shamrocks by Posh Impressions; Sayings by: Touche and Darcies.
Supplies needed:
Double stick tape or glue
Dries clear adhesive
Watercolor colored pencils
Pop Dots: 1/16, 1/8, 1/4 inches
Measurements:
Main card: 8 1/2 x 11
Folds to 5 1/2 x 8 1/2
White panel: 5 1/8 x 8 1/8
Green gingham: 5 x 8
Instructions:
1. Cut out bunny image.
2. Color/watercolor and allow to dry.
3. Mount the velvet shamrocks on supporting cardstock and detail
trim.
4. Layer the white and gingham panels to the main card. Layer
the saying onto the green panel.
5. Position the four main pieces onto the main card. When you
have the placement you desire, use the sizes of pop dots to attach.
On this sample: the saying is flat on the card; the bunny is
on with the 1/8 dots, the small shamrock is on with the 1/16 inch dots,
and the large shamrock is on with the 1/4 dots.
6. Complete the inside of the card.
7. Using the dries clear adhesive, glue on the rhinestones and the
shamrock punch-outs.
8. Happy St. Patrick's Day!!
CEX111 Fancy Shamrock Appliqués
Stamps by: Heart by All Nite Media; Stem by Posh Impressions.
Supplies needed: None
***We sent enough for three shamrock appliqués. After actually putting this together, it is so large that only one would be needed on a shirt--three would be overwhelming. So, enjoy the extra appliqués on the back of a denim jacket or on a canvas bag!
Instructions:
1. Detail trim as you normally do.
2. Position the hearts into a "shamrock-shape" (isn't that
cool?) on your garment. You will probably want to lay them out first
and then one at a time,
remove the Peel'n'Stick and position appropriately.
3. Add the stem.
4. Now, you have no excuse not to have something very Irish on the
17th!!! Happy St. Patrick's Day!!