June 2004 Creative Express Projects
CEX125 Candle Accordion Card
Stamps by: Candle by Darcies; Sayings by Stampendous!
Supplies needed:
Double stick tape or glue
Dries clear adhesive
Pop Dots: 1/16 and 1/8 inch
Measurements:
Card Section:
Instructions:
1. Decide how many candles you wish to use for this
card. That will make a difference on how many sectioned panels you
use. We are sending enough for eight sections. If
you choose to use less than eight candles, simply trim off the panels.
2. Place each candle on support stock and trim (if not already done
for you).
4. Layer the decorative papers onto the main card.
5. Using the pop dots, attach each candle to the main card.
6. Layer on your sayings.
7. Using dries clear adhesive, glue on the rhinestones and allow to
dry. This step may already be done as well. We may have
sent components from another projects that are in various stages of
complete.
You will be making this card (basically). Except the hat will be the
new velvet hat with the gorgeous feathers on it. Also, the card for
this year is a tad smaller than the card from the previous year.
Measurements:
CEX126 Patriotic Puppy with Feathered Hat
Stamps by: Puppy is Unknown; Rocket and Star Balloons by VIP; Velvet Hat by Museum of Modern Rubber; Star (on Hat) by DeNami; All the rest are by Darcies.
Supplies needed:
Double stick tape or glue
Pop Dots: 1/16, 1/8, 1/4 inch
Markers
Instructions:
1. Place all velvet images onto the support
cardstock and detail trim. The hat is already done for you.
(See instructions for the details of how it was assembled).
2. Color the rocket and any other image you wish to color and allow
to dry.
3. Layer on the decorative paper and cardstock.
4. Complete the inside of the card.
5. Tie the ribbon (ooppsss! I forgot the ribbon in the initial
packages) around the tail. That piece is a separate piece than the
ribbons that are the strings of the balloons. Then, tape the strings
of the balloons to the cardstock on the back of each balloon. Also,
tape the ribbon to the back of the puppy just to keep it in place.
6. Position the puppy and balloons onto the main card. When
you are pleased with the placement, use the variety of pop dots to attach
to the main card.
7. Happy Fourth of July!!
CEX127 DeNami Seashells Card
Stamps by DeNami Design; Sayings by Darcies
Supplies needed:
Double stick tape or glue
Pop Dots: 1/16, 1/8, 1/4 inch
Measurements:
Main Card:
Folds to:
Turquoise Panel: 6 1/2 x 6 1/2
White Panels: 3 x 3
Instructions:
1. Place all velvet images onto the support stock
and detail trim.
2. Tape (or glue) the turquoise panels to the main card.
3. Attach the white decorative panels to the main card.
4. Complete the inside.
5. Arrange the seashells onto the panels. When you have them
as you wish, use the variety of pop dots to attach them to the main card.
Measurements:
Main Card: 10 x 12
Folds to: 6 x 10
Decorative Panel: 5 1/2 x 9 1/2
CEX128 Picture Postcard
Stamps by: Tree by DeNami; Sun by Azadi/Limited Edition; Sayings by Darcies, Ann-ticipations.
Supplies needed:
Double stick tape or glue
Dries Clear Adhesive
Pop Dots: 1/16 and 1/8 inch
Instructions:
1. The decorative panel is watercolored for you.
2. Place the velvet tree images onto the support stock and detail
trim. The sun is already on support stock.
3. Layer the decorative panel onto the main card. The corners
are for decoration only and need to be secured with double stick tape or
glue. ***Because of the watercoloring on the panel, tape (or glue)
needs to be put along the entire border of the panel. Otherwise, it
will not lay flat.
4. Using double stick tape or glue, position the sun onto the main
card.
5. Using the pop dots, attach the tree images to the main card.
Remember that pop dots will not stick to velvet. Sometimes it is
easier to put the pop dot onto the main card and then position the image
onto it.
6. Layer on the front saying and complete the inside of the card.
7. Using the dries clear adhesive, glue the kite and the palm tree
buttons onto the main card. The front button is glued to the
bottom two buttons (at the palm part) and the main card (at the
trunk). (There is also a seagull included for you to use if you wish.)
CEX129 Red Hat Card
Stamps by: Hat by Heartlooms!! Sayings by Stampendous!
Supplies needed:
Double stick tape or glue
Pop dots; 1/8 inch
Measurements:
Main card: 6 1/4 x 9 1/4
Folds to: 4 5/8 x 6 1/4
Decorative Panel: 4 x 6
Instructions:
1. This card is for all the Red Hatters we all know!!
2. Layer on the decorative panels. One is for the outside.
The other two are for completely lining the inside of the card!!
3. Complete the inside with the layered sayings and velvet bows.
(Remove the Peel'n'Stick and place directly down.)
4. Using pop dots, attach the hat to the main card.
5. Surprise a friend soon!!