Creative Express Projects November 2005
CEX190 Thanksgiving House 2005
Stamps by: House set by Heartlooms; Suzy by
Suzy's Zoo/Rubber Stampede; Tree by Personal Stamp Exchange;
Small Leaves by Holly Berry House. Sayings by: Darcies and
Stampendous!
Supplies needed:
Double stick tape or glue
Dries clear adhesive
Pop Dots: 1/16; 1/8; 1/4
Colored Pencils
Measurements:
Main card: 8 1/2 x 17
Folds to: 8 1/2 x 8 1/2
Leaf paper: 8 1/2 x 8 1/2
White panel: 7 x 7
Instructions:
1. Place velvet house images onto support stock and
detail trim.
2. Using the dries clear adhesive, glue the roof onto the main
house.
3. Color the tree and Suzy.
4. Layer the leaf paper onto the main card.
5. Complete the inside of the card.
6. Using 1/8 inch pop dots, attach the house to the main card.
***Remember NOT to put pop dots where the chimney needs to tuck under.
6. Using 1/16 inch pop dots, attach the chimney under the roof part.
7. Using the 1/4 inch pop dots, attach Suzy to the main card.
8. Position the little leaves onto the main card.
9. Using dries clear adhesive, glue the leaf onto the main house.
CEX191 Pumpkin Pie Thanksgiving
Stamps by: All stamps by Darices.
Supplies needed:
Double stick tape or glue
Dries clear adhesive
Pop Dots: 1/8 inch
Measurements:
Main Card: 7 x 10
Folds to: 5 x 7
White Panel: 4 1/2 x 6 1/2
Decorative Panel: 4 1/4 x 6 1/4
Instructions:
1. Place beige piece onto the support stock and
detail trim. You can cut off the whipped cream section that extends
off the pie.
2. Detail trim the "pie" image. Again, cut off the
whipped cream section.
3. Place whipped cream onto the support cardstock and detail trim.
4. Layer on the white panels and decorative papers inside and
outside.
5. Layer on the sayings.
6. Remove the PNS from the pie section and position it onto the
crust.
7. Using the pop dots, attach the image to the main card.
8. Using dries clear adhesive, glue the whipped cream to the top of
the pie.
9. Using dries clear adhesive, glue the "cinnamon" onto
the whipped cream and allow to dry.
10. Happy, Happy and Blessed, Blessed Thanksgiving Wishes!!
Measurements:
Main card: 7 x 10
Folds to: 5 x 7
Decorative Panel: 4 3/4 x 6 3/4
CEX192 Red and White Poinsettias
Stamps by Heartlooms; Sayings by: The Stamp Pad, Stampendous!
Supplies needed:
Double stick tape or glue
Dries clear adhesive
Pop Dots: 1/16 and 1/8 inch
Instructions:
1. Place velvet images onto double support stock and
detail trim.
2. Layer on the decorative papers inside and out.
3. Complete the inside of the card.
4. Using the 1/16 inch pop dots, attach the white poinsettia to the
card.
5. Using the 1/8 inch pop dots, attach the red poinsettia to the
card. Remember that pop dots will not stick to velvet, so your
placement of the dots is important.
6. Using the dries clear adhesive, glue the rhinestones to the
centers and allow to dry.
CEX193 Gingerbread Girl and Boy
Stamps by Heartlooms; Sayings by Penny Black, The Stamp Pad,
Supplies needed:
Double
stick tape or glue
Dries clear adhesive
Pop dots: 1/8 inch
Measurements:
Main card: 7 x 11
Folds to: 5 1/2 x 7
Decorative panels: 4 1/2 x 5; 4 x 5
Instructions:
1. Place velvet images onto support stock and detail
trim.
2. Layer on the decorative paper inside and out. I find it
easier to tape the paper to the main card and then trim off the edges that
overhang...
3. Complete the inside of the card.
4. Using pop dots, attach the images to the main card.
5. Using dries clear adhesive, glue on the rhinestones and
bow. Allow to dry.
Measurements:
Main card: 6 3/4 x 9 3/4
Folds to: 4 7/8 x 6 3/4
CEX194 Velvet Stockings Hung with Care
Stamps by: Stocking by Heartlooms; Fireplace and Fire by Darcies.
Supplies needed:
Double stick tape or glue
Regular Scotch tape
Pop dots: 1/8 inch
Glitter Glue or
Dries clear adhesive with crystal glitter
Markers
Instructions:
1. Okay, ladies!! This card is a bit "piddly",
but it is sure cute!! I have been trying to put together a card with
with fireplace for years now. Mom had the idea of increasing this
fireplace to fit our stocking and wa--la!! Here is the fireplace
card!!
2. Cut out the interior of the fireplace. Using regular scotch
tape, tape the dark brown square so that it is the interior of the
fireplace.
3. Double stick tape or glue the fireplace onto the main card and
detail trim so that the whole card is the shape.
4. Color the fire with markers.
5. If you are adding glitter to the fire, do so now and allow to
dry. (The sample is shown without glitter).
6. Place the red stockings onto the support stock and detail
trim. Be sure to trim some of the cuff off on all sides so that the
white cuff can fit better. ***If you want to have one stocking
smaller (like for a baby), cut on the inside of the embossed lines.
That way, you keep the shape but it does make it smaller.
7. Cut out the white cuffs, heels, and toes. I was super busy
and accidentally did all the layering for you--ooops!! Anyway, they
are on PNS, then white support stock, then back on PNS. ***If you
are making one smaller, again just trim to the inside of the embossed
lines.
8. Score and remove the PNS on the white pieces and place them
directly onto the red stockings. Some of the white cuff may overhang
on the back and that is okay.
9. Using the pop dots, position the stockings onto the main
card. You can put a pop dots on the back of the cuff that may be
overhanging for support.
10. Merry Christmas!!!